The new KNX F 50 compact room controller quickly shows you everything it can do. It has a choice of four options for determining the room temperature alone: through the built-in temperature sensor for a start; then through the temperature sensor of a...
The new KNX F 50 compact room controller quickly shows you everything it can do. It has a choice of four options for determining the room temperature alone: through the built-in temperature sensor for a start; then through the temperature sensor of a connected extension module; thirdly, through an optionally connected remote sensor; and finally, through the temperature sensor of any other KNX device via a 2-byte float message. Moreover, the actual temperature may be obtained from a combination of the named sources shown on the display of the room controller.
The F 50 room controller provides exclusive performance in terms of function extension. With its two integrated temperature regulators, the device is able to control the temperature in two rooms in parallel. Firstly in the location where the compact room controller has been installed and also, with the aid of a connected extension module, to an adjoining room – the hallway perhaps. Connection to extension modules can be realised in a flexible way. This enables functions to be extended simply, quickly and inexpensively. As the extension modules can be installed at a distance of up to 30 metres, there is unlimited availability of all the KNX functions also (for example) in the room next door. This includes an independent temperature control.
This new JUNG device also scores well through its intuitive ease of operation. A convincing example of this is its large back-lit liquid crystal display. The most important values and functions are presented on the display, which can be read easily from any angle. The user also has the option to individually select the key symbols that correspond with each function during the programming phase. The allocation of functions can be further improved with keys labelled with the Graphic Tool. The same applies for the RGB status LEDs. All the keys of the room controller can alternatively be assigned with push-button sensor or regulator functions.