Linealuce Mini 37R surface/ Linealuce Mini 37 surface DALI/DMX
Linealuce is a linear product that brings architectural details on buildings to life with light. The range has now been extended; with higher performance solutions that minimize energy consumption per meter, in accordance with the size of the wall, or building being lit by the grazing light. Linealuce models are fitted with a wall grazing optic available with different powers per linear metre so the flux can be optimized according to the height to be lit (up to 5 metres for the Linealuce Mini and up to 15 metres for the compact version). This type of grazing light enhances surface textures and creates positive-negative effects when installed on openings.
Linealuce Mini 37R surface
• Wall, ceiling and balustrade installation using accessory supports.
• Extruded aluminium body and end caps in die-cast zamak complete with silicone gaskets.
• Optical compartment closed at the top by a 3mm thick transparent glass screen secured with silicone.
• The product is supplied with a single PG9 cable gland in nickelplated brass and an outgoing PVC cable.
• The linear connector IP68 and the junction box IP67 with quickterminals are available for the electrical connection. Electronic power supplies to be ordered separately.
• Luminaire ready for pass-through wiring.
• All external screws used are in A2 stainless steel.
Linealuce Mini 37 surface DALI/DMX
• Wall, ceiling and balustrademounted using accessory brackets.
• Extruded aluminium body, with die-cast zamak end caps complete with silicone seals.
• The top of the optical assembly is closed by a 3 mm thick transparent glass screen, fixed with silicone.
• The product is supplied with a single nickel-plated brass cable gland PG9 and a PVC outlet cable. For the electrical connection there is an IP68 linear connector and an IP67 junction box with quickcoupling terminals.
• Electronic ballasts to be ordered separately.
• Vin=48V dc electronic ballasts to be ordered separately, DALI or DMX-RDM internal drivers, contained in special extruded aluminium side boxes, with zamak die-cast end caps complete with silicone seals, nickel-plated brass cable glands PG13.5 and outlet cables.
• Luminaire designed for passthrough wiring.
• All external screws are made of A2 stainless steel.