SIP M3 House

Ian Hsü - Gabriel Rudolphy as Architects

The project was to build a 155 m2 house in a very limited time frame, and with a reduced budget. In response we decided to use an efficient construction system and a simplified palette of finishes. We designed a structure completely based on SIP panels (structural insulated panels), supported on a grid of foundations that intervene minimally in the existing terrain. Modulation and system We defined different three-dimensional modules, made up of floor, walls and roof panels. The modules were designed in two widths and two heights, which in their combination and association constitute the rooms of the house. Material optimization The dimensions used to configure the modules correspond to the manufacturing dimensions of the panels, maximizing the material and reducing losses during construction. Program The intention was to minimize circulation surfaces, placing the common area at the center of the project, and the other rooms around it. This allowed us to concentrate the load bearing walls in the side aisles of the house, leaving the central common area without any structure. The program is developed in 4 parallel aisles formed by a sum of modules. Two aisles are composed of modules 244 cms wide, corresponding to the service program, and two aisles are made up of modules of 488 cms wide, corresponding to common rooms. We merged or alternated high and low modules in all aisles, achieving greater heights and therefore higher volumes of air in all the rooms of the house without necessarily increasing the surface (cubic meters vs square meters). The resulting roof, with alternating heights, generates light entries oriented to the north in most rooms. This basic principle is why we have called the house ”SIP m3″. SIP due to its panel based structure and m3 due to the cubic volume.

Read story in ItalianoDeutsch and Português

Product Spec Sheet

ElementBrand
Engineering floor woodAB kupfer
Impregnated woodConcon Maderas Impregnadas
ManufacturersTecnopanel
Product Spec Sheet
Engineering floor wood
Impregnated wood
Manufacturers
Products Behind Projects
Product Spotlight
News
CAN adds verdant extension to London terrace
12 Nov 2024 News
CAN adds verdant extension to London terrace

Architectural studio CAN has completed the extension of a terraced house in Stoke Newington, London,... More

QARTA Architektura’s design for new Blum HQ exhibits smart industrial aesthetic
12 Nov 2024 News
QARTA Architektura’s design for new Blum HQ exhibits smart industrial aesthetic

Czech creative studio QARTA Architektura has designed a new Prague-based headquarters for Blum, a le... More

Fujianese restaurant blends traditional Chinese elements with contemporary aesthetics
12 Nov 2024 News
Fujianese restaurant blends traditional Chinese elements with contemporary aesthetics

Located in Prospect Heights, Brooklyn, Nin Hao is a new Fujianese restaurant designed by the archite... More

Studio Gang Unveils Expansion at California College of the Arts in San Francisco
12 Nov 2024 News
Studio Gang Unveils Expansion at California College of the Arts in San Francisco

Studio Gang has completed an exciting new expansion for the California College of the Arts (CCA) cam... More

Frankie Pappas and community activists transform GBV hotspot in South African township with bright pink landmark
11 Nov 2024 News
Frankie Pappas and community activists transform GBV hotspot in South African township with bright pink landmark

Frankie Pappas is a collaborative architecture and design studio. The name is a collective pseudonym... More

Open Architecture designs conical Sun Tower as a “cultural lighthouse”
11 Nov 2024 News
Open Architecture designs conical Sun Tower as a “cultural lighthouse”

Beijing-based Open Architecture has completed the Sun Tower, a waterside cultural facility in the Ch... More

Midland Metropolitan University Hospital sets new standard for clinical healthcare design
7 Nov 2024 News
Midland Metropolitan University Hospital sets new standard for clinical healthcare design

Architectural studios HKS, Cagni Williams, and Sonnemann Toon have completed the Midland Metropolita... More

EovaStudio uses Baguette Oval glazed terracotta facade from Tempio in sports pavilion renovation
6 Nov 2024 News
EovaStudio uses Baguette Oval glazed terracotta facade from Tempio in sports pavilion renovation

Seville-based architectural firm EovaStudio has renovated and improved a sports pavilion located in... More