Embodied carbon

Low Carbon

The design targets an embodied carbon intensity of 279 kg CO2e/m² (A1–A3, excluding M+E and interior finishes). This figure sits comfortably below both the LETI 2030 Design Target (< 350 kg CO2e/m², A1–A5) and the RIBA 2030 Built Target (< 475 kg CO2e/m², A1–A5), positioning the project as a benchmark for low-carbon refurbishment.

Key contributors to this performance include:

  • Retention of existing structure: The entire concrete frame and foundations were retained, avoiding the significant embodied carbon associated with new construction.
  • Material substitution: New additions replace carbon-intensive concrete with galvanised steel and Douglas fir structural elements.
  • Lightweight design: The new three-storey extension uses a thin (3 mm) galvanised-steel facade that minimises material demand while achieving visual depth through deep reveals and fins.
  • Standardised components: Prefabrication and modular detailing reduced waste, fabrication energy, and transport emissions.

Low-carbon materials

  • Douglas fir 200 × 200 mm joists (structural timber)
  • Solid spruce end-grain flooring in communal areas, supplied by Naturally Wood Floors.
  • Biodiverse extensive green roof system

Operational Emissions / Energy

Efficient

The building’s operational strategy integrates passive design measures, renewable energy systems, and efficient electrical infrastructure to achieve an EPC rating A and exemplary energy-use intensity.

Predicted operational energy use

  • Regulated: 30.3 kWh/m²/yr (for example heating and lighting)
  • Unregulated: 35.8 kWh/m²/yr (for example IT use)

Predicted primary energy use

  • Regulated: 32.7 kWh/m²/yr
  • Unregulated: 35.8 kWh/m²/yr

On-site energy generation

  • 28 percent of primary regulated energy use 
  • 13 percent of total (regulated + unregulated) energy use

Energy-efficiency strategies

  • Passive design: Optimal glazing ratios, deep eaves, and natural ventilation supported by projecting steel fins reduce heating and cooling loads throughout the year.
  • Thermal comfort: The facade’s geometry provides self-shading, with integrated blinds mitigating future overheating scenarios.
  • All-electric operation: The building is fully electric, eliminating gas consumption and associated carbon emissions.
  • Renewable generation: Roof-mounted photovoltaic panels supply a significant share of on-site electricity demand.
  • Building envelope: Internal insulation and high-performance glazing ensure consistent thermal performance.

Service and maintenance emissions

Strategies:

  • The project deliberately reduces long-term service and maintenance emissions through a strategy of material efficiency, durability, and simplicity. The CAT A fit-out was intentionally pared back, with exposed services and robust finishes that minimise future replacement cycles and material waste during future tenant changes. Douglas fir joists and solid spruce end-grain flooring were selected for their longevity and ease of repair, extending service life.
  • Externally, galvanised steel and anodised aluminium components offer high durability with minimal maintenance requirements, while their modular, bolted assembly allows for straightforward replacement or upgrading without invasive work.
  • A Site Waste Management Plan further supported this low-maintenance ethos, ensuring efficient material use during construction and setting a precedent for waste reduction in ongoing building management. The rainwater attenuation tank also contributes to reduced maintenance emissions by moderating stormwater loads and protecting the site from water-related degradation over time.

Afterlife

Strategies:

  • The building was designed for long-term adaptability, with a flexible base build that can accommodate a variety of future uses. Each of the five office floorplates can operate as a single-tenant workspace or be subdivided, with up to eight individual units per floor — the MEP systems were planned to support both models. 
  • This adaptability extends the building’s operational life, minimises future material demand, and reduces the need for resource-intensive redevelopment. 
  • The design’s emphasis on simple, open-span floor structures and modular fit-outs ensures it could evolve to suit different programmes over time.

Strategies:

  • Circular economy principles informed both the structure and the envelope. All new components — including the galvanised steel frame, facade panels, and anodised aluminium windows and doors — were detailed with exposed fixings for straightforward disassembly, replacement, or reuse. 
  • The use of standardised, prefabricated modules also means these elements can be easily removed without damaging adjacent materials. 
  • Together with the retained concrete frame, these strategies allow much of the building to be reused or recycled at end-of-life, embedding circularity directly into the construction logic.

Key products in low carbon design

Inception End Grain
CO2
Inception End Grain
Naturally Wood Floors
Share or Add 469 Bethnal Green Road to your Collections