Sustainability Report
Certificates
Embodied carbon
The project reduces embodied carbon through early design-stage material optimization and lifecycle assessment. Key approaches include:
-
Material reduction strategies
-
Polished concrete floors serve as both structure and finish, eliminating additional flooring layers.
-
Mechanical system downsizing reduced ductwork, ceiling voids, and structural loads.
-
Finish layers were minimized, particularly in high-traffic public areas.
-
-
Low-carbon structural materials
-
Concrete mixes incorporate supplementary cementitious materials (SCMs) to reduce Portland cement content.
-
Local sourcing of steel and concrete reduces transportation emissions.
-
-
Responsible material sourcing
-
FSC-certified wood products.
-
Avoidance of tropical hardwoods, vinyl, and natural gas infrastructure.
-
Preference for materials with:
-
Environmental Product Declarations (EPDs)
-
Cradle-to-Cradle
-
Declare
-
SFI and BIFMA certification frameworks
-
-
-
Indoor environmental health
-
Low-VOC finishes and adhesives.
-
Lifecycle-based evaluation of interior materials.
-
Operational Emissions / Energy
The sustainable engineering highlights for the project are:
-
Fossil-Fuel-Free Electrification
-
The building operates as a fully electric facility.
-
There is no on-site combustion, eliminating direct carbon emissions from the structure.
-
-
Renewable Energy Integration
-
A closed-loop geothermal system serves as the primary energy source.
-
The system utilizes 31 boreholes drilled to a depth of roughly 457 m underground.
-
This geothermal setup supplies about 90% of the building's heating and cooling needs.
-
Any remaining thermal demand is handled by high-efficiency electric systems.
-
Electricity is provided through university agreements for wind and solar power.
-
-
High-Performance Building Envelope
-
The exterior features a triple-glazed curtain wall for superior insulation.
-
Upright and diagonal slotted air vents (shading louvers) are installed externally to manage solar heat gain.
-
The overall envelope design cuts energy demand by approximately 30%.
-
-
Mechanical Efficiency
-
The design employs a chilled beam ventilation strategy for cooling.
-
It utilizes heat recovery HVAC systems to recycle energy.
-
The building uses occupancy-based sensors to automatically control lighting and power outlets.
-
Service and maintenance emissions
The service management and material strategies for the project:
-
Durable Material Selection
-
Choosing long-lasting materials reduces the need for frequent replacement cycles.
-
Polished concrete is used to minimize the need for extra maintenance finishes or chemical cleaners.
-
-
Flexible Interiors
-
Lego-like modular furniture systems allow for a flexible floor plan.
-
Spaces can be changed or updated without the need for messy demolition.
-
-
Building Automation System
-
The system allows for real-time monitoring of how the building is performing.
-
Continuous check-ups (commissioning) ensure systems stay efficient.
-
Smart monitoring leads to an extended equipment lifespan by preventing overwork.
-
-
Waste Management Integration
-
The project fully supports the university’s Zero Waste Initiative.
-
90% of temporary construction steel supports (shoring) were salvaged and reused rather than being scrapped.
-
Afterlife
-
The building is designed as a long-life, loose-fit vertical campus, meaning the "bones" are built to last while the "insides" can change easily.
-
Column-free perimeter zones provide wide-open areas that allow for total room-layout changes.
-
Offices are built to handle a changing number of people (variable occupancy) without needing new walls.
-
Classrooms and event spaces use movable window covers and partitions to shift from small rooms to large halls.
-
By putting all the pipes and elevators in a central core, the rest of the building can be repurposed in the future without touching the main structure.
-
Lego-like building methods for furniture and interior systems mean everything can be taken apart and reused elsewhere.
-
The design uses durable, replaceable layers instead of glued-together (composite) materials that are hard to recycle.
-
Polished concrete and other structural surfaces are left exposed, which reduces the need for extra "skin" layers like carpet or drywall.
-
The project focused on steel salvage and reuse during the building process to keep materials out of landfills.