Sustainability Report
Embodied carbon
The project reduces embodied-carbon impacts primarily through its hybrid structural system and extensive use of timber. STEICO states that STEICOfloc contains approximately 64 kg CO₂-eq./m³ of biogenic carbon under EN 15804+A2. The ground-contacting components, including the base level, exterior walls, and floor slabs, use exposed concrete, and the central structural core is also exposed concrete. The remaining protective envelope is a timber element structure that wraps around the concrete core. Several measures specifically reduce the material-related environmental impact:
- Structural timber was sourced from regional sawmills wherever possible, reducing transport requirements.
- The structural timber consists of spruce/fir.
- Battens for the rainscreen cladding were also sourced regionally.
- The facade uses low-knot silver fir, specified as certified Swiss wood (Schweizerholz).
- Window frames use exposed low-knot spruce/fir.
- Cellulose insulation is manufactured from recycled paper.
- Wood-fibre insulation is used as part of the external envelope.
Operational Emissions / Energy
The project incorporates several measures intended to reduce operational energy demand and direct carbon emissions. The timber building envelope provides a high-performance thermal enclosure. The wall and roof cavities are insulated using cellulose, wood-fibre and mineral-wool products, creating a well-insulated. envelope and supporting a stable indoor microclimate. The roof is completely covered with photovoltaic modules. The installation has a total output of 42 kWp
The electricity is primarily intended for on-site consumption, while surplus electricity is fed into the public grid. The combination of the high-performance envelope and photovoltaic generation allows the building to operate with no direct on-site CO₂ emissions, according to the project information.
Annual direct operational CO₂ emissions: 0 kg CO₂/year, as stated by the project source.
Service and maintenance emissions
Several aspects of the material selection can contribute to durability and reduced replacement requirements:
The project features a robust timber construction with a rainscreen facade and TOP 180 wood-fibre insulation, suitable for external facades and roofs. It minimizes environmental impact through efficient energy and material choices, including a high-efficiency heat pump with geothermal probes and a rooftop photovoltaic system. The design reduces embodied carbon by prioritizing regional timber and native wood cladding. Passive thermal management is enhanced with external venetian blinds and fabric awnings to optimize daylight and control solar heat gain for year-round interior comfort.
Afterlife
Yes. The house includes a self-contained 2.5-room basement annexe. An additional room currently functions as an office and is integrated into the main dwelling. The layout allows this office to be transferred to the secondary apartment if the occupants' spatial requirements change. This would transform the secondary unit into a 3.5-room apartment. The adaptability is enabled by:
- dual access to the office;
- a lightweight partition wall;
- a partition that can be dismantled relatively easily;
- the ability to replace the partition with the existing interior door.
This is a genuine example of planned spatial adaptability. The building's placement on the sloping site also supports this arrangement: the lower level accommodates the secondary apartment, entrance, storage, and garage, while the upper residential volume is organized around a compact central core.
The project explicitly considers reusability and future spatial change, particularly through the lightweight internal partition that can be dismantled and replaced. The timber construction also provides a material system that is potentially more amenable to selective replacement and disassembly than a fully monolithic construction.