Swiss house combines a concrete base with a regional timber envelope

Applied products
Insulation Geration FUTURO
1
CO2
Insulation Geration FUTURO FLUMROC
GWP A1–A3 2.23 kg CO₂e/m²
STEICOfloc
1
STEICOfloc STEICO
GWP A1–A3 -174.00 kg CO₂e/m²
View all applied products

Designed by Dolmus Architekten, House on Concrete Walls in Schüpfheim, Switzerland, is a 260-square-meter residence containing a primary home and a self-contained secondary apartment. Its hybrid structural system responds directly to the site’s sloping topography.

The ground-contacting base, including exterior walls and floor slabs, is constructed in exposed concrete, while a central concrete core provides structural support. Above, the main volume is wrapped in a continuous timber envelope. The material strategy combines regional timber sourcing with insulation selected for its environmental characteristics.

photo_credit Egemen Karakaya
Egemen Karakaya
photo_credit Egemen Karakaya
Egemen Karakaya
Applied Products block will be inserted here

Regional timber and material selection

Timber sourcing was considered at the level of individual building components. Structural spruce and fir, together with battens used for the rainscreen system, were sourced from regional sawmills wherever possible. The facade itself is made from low-knot silver fir and certified Swiss wood. Timber also extends to the window frames, which use low-knot spruce and fir, maintaining a consistent material palette across the envelope.

photo_credit Egemen Karakaya
Egemen Karakaya

The roof is fully covered with photovoltaic modules with an installed capacity of 42 kWp. Electricity is used on site, with surplus generation fed into the public grid. The building is also assessed through GEAK Neubau, the Swiss cantonal building energy certificate for new construction, which rates envelope efficiency, overall energy efficiency, and direct operational CO2 emissions.

 

A concrete base anchors the house to the slope

The house responds directly to the site’s sloping topography, emerging from a concrete base anchored into the hillside.

The lower level accommodates the secondary apartment, entrance, storage, and garage. A series of concrete wall slabs shapes the volume, projecting from the terrain in places and forming the structure of the base. The secondary apartment occupies 2.5 rooms within this level.

An additional room currently functions as an office within the primary dwelling but can be reassigned to the secondary apartment if household needs change.

photo_credit Egemen Karakaya
Egemen Karakaya
photo_credit Egemen Karakaya
Egemen Karakaya
photo_credit Dolmus Architekten
Dolmus Architekten

Above the concrete base, a compact central core contains the bathrooms, kitchen, and vertical circulation. Acting as both a structural and organizational center, it allows the living and dining spaces to wrap around it. On the upper level, the same arrangement creates an anteroom from which the bedrooms face the surrounding landscape.

photo_credit Egemen Karakaya
Egemen Karakaya
photo_credit Dolmus Architekten
Dolmus Architekten
photo_credit Dolmus Architekten
Dolmus Architekten
photo_credit Dolmus Architekten
Dolmus Architekten

 

Concrete core and timber envelope

The distinction between the concrete core and timber envelope also defines the building's material logic. Rather than extending the concrete structure throughout the house, timber is used for the upper envelope, limiting concrete to the base and central structural elements while keeping the outer construction relatively lightweight.

photo_credit Egemen Karakaya
Egemen Karakaya
photo_credit Egemen Karakaya
Egemen Karakaya

A continuous timber envelope wraps the upper volume, while subtle shifts between floors articulate the building’s form.

Cellulose and mineral-wool insulation contribute to the thermal performance of the timber envelope, supporting a stable indoor microclimate. 

photo_credit Egemen Karakaya
Egemen Karakaya

 

Adapting the secondary apartment over time

Adaptability is built into the relationship between the primary dwelling and secondary apartment. An additional room, currently used as an office, has dual access and is separated from the main dwelling by a lightweight partition wall.

If household needs change, the partition can be removed and replaced with an existing interior door, allowing the room to become part of the secondary apartment and expand it from a 2.5-room to a 3.5-room unit.

photo_credit Egemen Karakaya
Egemen Karakaya
photo_credit Egemen Karakaya
Egemen Karakaya

Project credits

Architects

Sustainability

Efficient
Embodied carbon
Energy Neutral
Operational Emissions / Energy
Efficient
Service and maintenance emissions
2
Key Low-Carbon Products

Product spec sheet

Manufacturers
Manufacturers
Interior Flooring
Naturofloor by di sein GmbH
Custom Doors
Single Leaf Door by Schreinerei Lötscher GmbH
Timber Cladding

Project data

Project Year
2026
Building Area
260 m2
Applied Products
STEICOfloc
1
STEICOfloc STEICO
GWP A1–A3 -174.00 kg CO₂e/m²
Insulation Geration FUTURO
1
CO2
Insulation Geration FUTURO FLUMROC
GWP A1–A3 2.23 kg CO₂e/m²
Share or Add House on Concrete Walls to your Collections