Facade cladding system

An overview of projects, products and exclusive articles about facade cladding system

Product • By TEMPIO • FS-L Tempio Ventilated Façade Systems

FS-L Tempio Ventilated Façade Systems

FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More

Product • By TEMPIO • FS-30 - Ceramic pieces for wall courtains

FS-30 - Ventilated Facade Elements

FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More

Product • By TEMPIO • FK-L 59/16 - Ceramic pieces for wall courtains

FK-L 59/16 - Ventilated Facade Elements

FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More

Product • By TEMPIO • FK-O 8/20 - Ceramic pieces for wall courtains

FK-O 8/20 - Ventilated Facade Elements

FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More

Product • By TEMPIO • FK-L 4/16 - Ceramic pieces for wall courtains

FK-L 4/16 - Ventilated Facade Elements

FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More

Product • By TEMPIO • FK-2B 5/16 - Ceramic pieces for wall courtains

FK-2B 5/16 - Ventilated Facade Elements

FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More

Project • By ULMA Architectural Solutions • Offices

Green Ray Malaga

ULMA’s solution complied with the technical requirements and offered a technologically suitable material.The Green Ray building belongs to Andalusia Technology Park, with headquarters at the University of Malaga campus. It is a business incubator, with a programme consisting of offices of different sizes, with a technological focus, for new entrepreneurs as well as already consolidated companies. The ventilated facade is an exterior cladding system for the walls of a building, leaving a ventilated chamber between the cladding and the insulation. It is the most effective system to improve a building's insulation, eliminating undesirable thermal bridges, as well as condensation problems. For this and other r... More

Project • By GKD Metal Fabrics • Museums

Kunsthalle Mannheim Museum

The Kunsthalle Mannheim museum of modern and contemporary art was opened at the end of 2017 by Federal President Frank-Walter Steinmeier. As Germany's largest new museum building, it is a prime example of both civic commitment and architectural skill. The private patrons initiative – with SAP founder Hans-Werner Hector alone donating EUR 50 million – was what made the bold design at Friedrichsplatz possible. Based on the concept developed by the architects von Gerkan, Marg and Partners, a city within the city was created here, which reinterprets classic museum architecture while honoring Mannheim's historical city layout. The composition of room-forming cubes is visually connected by a sophisticated façade made of bronze-... More

Project • By ULMA Architectural Solutions • Individual Buildings

Newly constructed building

ULMA Architectural Solutions has supplied and installed its Ventilated Facade on 54 homes in the Rosales de Valdebebas residential development in Madrid.Combination of textures The project had very highly modulated geometric lines and the studio EMASE Arquitectura required textures to break up those surfaces. For this purpose, the ULMA VANGUARD façade was used with its wide range of textures. The smooth AIRE texture was combined with the wavy AGUA texture to give contrast and a dynamic effect to the facade. "The material plays an essential role in our projects, and the adaptability and resistance of polymer concrete was decisive when opting for ULMA's façade, we are totally satisfied with the res... More

Project • By ULMA Architectural Solutions • Community Centres

Sta Maria de la Paz Reception Centre

The Santa María de la Paz Reception Centre opened its doors in 1981 with the mission of providing shelter and all-round care to the homeless. At present, and within the works to replace its facilities, a Reception-Residence Centre has been built with capacity for 110 people. The project's main objective was the creation of welcoming spaces, both indoor and outdoor, given the complex personal, physical and psychological situation of the homeless people it targets.Within these premises, the architects responsible for the project “DAU Arquitectos” aimed for “the facade's design to be attractive and, within a modular order, to be stylish and discreet, and for it to bring some joy to the users”.In this context, the WATER texture was ch... More

Project • By ULMA Architectural Solutions • Primary Schools

CEIP ZELAIETA

ULMA External Wall System and facade cladding at CEIP ZELAIETA The spectacular optical effect of the texture of WATER creates the illusion that different shades of green have been used. ULMA Architectural Solutions has implemented the External Wall System and Ventilated Façade solution with polymer concrete panels at Zelaieta Infant and Primary School, in the town of Abadiño in the province of Bizkaia. Energy efficiency The owner wanted a highly efficient building with a thermal transmittance of less than 0.20 to achieve a building with ZERO energy consumption. ULMA External Wall System complies with this premise, as it is an energy-efficient industrialised system that meets the highest sustainability criteria.... More

Project • By ULMA Architectural Solutions • Community Centres

Civic Center Ibaiondo

The civic center of Vitoria- Ibaiondo has been coated with ULMA ´s Ventilated Facade system, presenting a unique optical effect achieved with the water or miniwave texture. This is a model plate of ULMA´s VANGUARD range, which consists of a series of volumes creating a wave with a pitch of 15 mm. This texture, with panels of the same color and grooves positioned in different directions can achieve an optical effect that varies polychromatism throughout the day, providing different shades which enrich the finish of the facade. The authors of the project: architects Eguillor Jesus Armendariz, Amaia Los Arcos Larumbe, from Idom, David Resano Resano from ACXT Architects, had clearly chosen this material, polymer concrete , for the opportunity... More