Cladding
An overview of projects, products and exclusive articles about cladding
Product • By TEMPIO • FS-LP 2/30 - Ceramic pieces for wall courtains
FS-LP 2/30 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FS-L Tempio Ventilated Façade Systems
FS-L Tempio Ventilated Façade Systems
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FS-30 - Ceramic pieces for wall courtains
FS-30 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FK-L 59/16 - Ceramic pieces for wall courtains
FK-L 59/16 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More
Product • By TEMPIO • FK-O 8/20 - Ceramic pieces for wall courtains
FK-O 8/20 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More
Product • By TEMPIO • FK-L 4/16 - Ceramic pieces for wall courtains
FK-L 4/16 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More
Project • By BURNAZZI FELTRIN ARCHITETTI • Cultural Centres
Centro S. Chiara installation and signage
The installation and the signage of “Centro Servizi Culturali Santa Chiara”, property of Trento Municipality, have been commissioned by a tendering procedure. The project includes the exterior and interior parts of a medieval former convent, partially protected by “Sovrintendenza dei Beni architettonici” (cultural heritage committee). The “Centro Servizi”, thanks to the adjoining urban park, links different parts of the city and, together with the two theatres, attracts people of all ages and different cultures. Part of the complex, uninhabited for ages, is in a severe state of disrepair and except from a few graffiti of a modest artistic level, there are offensive and xenophobic writings on the walls, evidence not only of urban but also ci... More
Project • By Lapitec • Distribution Centres
Eurovetro Recycling Headquarters
Eurovetro, the leading company in the glass waste recovery and recycling sector, wanted to strongly express its identity and image when realising its new state-of-the-art technological plant in Italy and in Europe. It achieved this by entrusting the project and the construction of the new headquarters in Origgio (Varese) to the architect, Francesco Renoldi. The architecture of the building seeks to reveal a process, a discipline and a quality expressed in the way of taking action. The shared idea of a distinct, strict and regulated architectural element was established. The building is solid yet transparent, seeking to maintain a compositional vocation that references an almost industrial assemblage and that is particularly attentive to t... More
Project • By CUPA STONE • Secondary Schools
Clisson High School
STONEPANEL™ is perfect for the facade of the new Aimé-Césaire High School located in Clisson (France). Ataub Architects and their co-contractor Linéa Architecture and Urbanism chose STONEPANEL™ Sylvestre for the exterior cladding -a total surface of 550 square meters- of this secondary education institution which provides different grades about construction industry. STONEPANEL™ Sylvestre is a gneiss stone, very light and uniform. It transmits sobriety with its natural luminosity. The use of STONEPANEL™ Sylvestre adds a touch of class and elegance to the outside of this building, opened in September 2014. STONEPANEL™ is a unique system, created and patented by CUPA GROUP, that can be used for any type... More
Project • By CUPA STONE • Hospitals
Lanchester Medical Centre
Lanchester Medical Centre has been finished in CUPA STONE innovative cladding system STONEPANEL™ to provide a traditional aesthetic for this new development in Lanchester (UK). A modern and sustainable building that meets the needs of the requirements of the smaller surgery that was located in the village. Edwards Architecture designed the project using BIM (Building Information Modelling). Completed in 2014, the building has been designed with the local environment in mind and finished in STONEPANEL™ Sahara to give a traditional finish which fits in with this protected area. Natural stone panels STONEPANEL™ Sahara are composed by multicolor quartzite with brown and grey tones, creating an elegant and bright look to this development. N... More
Product • By CUPA STONE • Saint-Yrieix Gneiss
Saint-Yrieix Gneiss
Authenticity and character. These are the foremost characteristics of this natural stone, with its shades of beige and grey combined with lighter tones. Extracted from our quarry in France, Saint-Yrieix Gneiss adds an elegantly subdued, radiant touch to contemporary or traditional projects. A beautiful stone with a layered texture, gneiss is highly resistant to both wear and thermal shock. It is available in various thicknesses, from 1.5 to 3 cm (0.59 to 1.18 in). A fantastic choice for exterior decoration projects such as garden borders, walls, facades, paving, or driveways.FORMATSTileThickness: 1.5 to 3 cmFINISHESNaturalMAIN COLORBeigeSECONDARY COLORGreyASPECTRuggedAPPLICATIONSFacadeInterior wallExterior wallInterior flooringExterior floo... More
Product • By GammaStone • Exteriors - microventilated façades
Exteriors - microventilated façades
The microventilated façade is an external cladding system that creates a thin air gap (open on the top and on the bottom) between the external face of the perimetric wall of the building and the external environment. This air gap creates a “chimney effect” that allows the ascending movement of the air that avoid condensation and dissipates the water vapor coming from the inside of the building. Microventilated cladding system suits peculiarly to old building renovations and in the projects with severe spatial constrains. More
Product • By CUPA STONE • INFERCOA
INFERCOA
Unique black toned slate with a characteristic riven and natural appearance. Highly versatile, INFERCOA slate can be used for any kind of interior or exterior applications. Unmatched resistance and natural elegance make it the perfect choice for any project. FORMATSTileThickness: 3 to 6 cm FINISHESNatural APPLICATIONSFacade, interior wall, exterior wall, interior flooring, exterior flooring, garden, swimming pool, road surface and pavement. More
Product • By Wonderwall Studios • Jagger
Jagger
These are vintage rail sleepers, marked and weathered by decades of steel, speed, and weight — hewn by innumerable thundering locomotives. Sourced from old railway tracks across Southeast Asia, the hardwood used for Jagger is exceptionally dense and durable, often teak or ironwood, selected for its strength and resilience.Jagger is a panel of intense warmth, richness, and substance. Its deep tones and heavy grain reflect the history it carries — the scars, cracks, and grooves are not defects, but stories of a life lived under pressure. The wood is reclaimed, cleaned, cut, and assembled by hand, transforming these monumental blocks into bold, architectural wall cladding.Dark and heavy — literally — Jagger doesn’... More
Product • By Wonderwall Studios • Wheels
Wheels
This is one of our signature panels. It’s hardwood reclaimed from redundant traditional building sources. The weather really went to work on this one, making it a diamond in the rough. Some great craftsmanship complements the natural erosion giving Wheels its unique feel of youthful antiquity.
Caption
Caption
More