Structure
An overview of projects, products and exclusive articles about structure
Project • By Dietrich Untertrifaller • Private Houses
Lake House
The house on the lake refers to the local boat and fishing houses and follows the tradition of rural construction by the water. Lightness, a low, wide roof structure and a strong emphasis on the horizontal determine the design. The timber construction, predominantly from local woods, is elevated to protect it from flood. The wooden porch surrounding the house widens to a terrace at the lakeside, completely covered by the steep saddleback roof. The vertical timber formwork of the facades is untreated, with wide glazing allowing generous views into the surroundings.
Bruno Klomfar
Bruno Klomfar
Bruno Klomfar
Bruno Klomfar
Bruno Klomfar
Bruno Klomfar
Bruno Klomfar
Dietrich Untertrifaller
Dietrich Unter... More
Project • By BoysPlayNice • Watch Towers
Lookout Tower at Kraličák
The lookout tower is a result of several years of collaboration with the local ski resort Kraličák. It is situated at the highest point between Hynčice and Stříbrnice on the hilltop Štvanice 866 m.a.s.l. The supposed center of the resort, on the hill in the forest amongst ski slopes. Around it is a beautiful dramatic vast landscape. The old town, a view of the entire Jeseníky mountains, on the other side, the heavily wooded hillside of Králický Sněžník where the Morava river springs from.The assignment has been fulfilled, a year-round accessible, 35 meter tall lookout tower, situated at the top station of the chair lift – the center of the resort.The tower stands here as a confident slim round obelisk. A center-point. A simple structur... More
Product • By TEMPIO • Rustikotta cladding
Rustikotta cladding
Tempio’s Rustikotta has unmistakable characteristics linked to the traditional facade system, whose contemporary expression adds depth and character to the project. It is ideal for modern architecture where imagination knows no bounds.
Rustikotta makes a significant and positive contribution to sustainable development and sustainable building. It brings pioneering new standards for architectural opportunities, to which its zero maintenance cost will be added over the years, as external conditions do not affect the ceramic and rainwater is sufficient tokeep it clean.
It is a safe and high quality option. It will give you a lot of opportunities. Use your imagination and add your own personal and individual touch.
More and more archit... More
Product • By TEMPIO • Baguettes by Tempio
Baguettes by Tempio
The design of these sunscreen/baguette pieces allows multiples applications: they can be used as lattice, can be used as a filter of the light, can be used as a hide element for stairwells and openings, can be used as balustrade, pergola or even can be used to separate two atmospheres (both indoor and outdoor). They are manufactured up to 1.80 m in natural (full body) and glazed colours. These ceramic tiles can be installed using a very simple fixing system, which also includes a safety clip which prevent the pieces to be removed easily. More
Product • By TEMPIO • FF-K 30/R300 - Ceramic pieces for wall courtains
FF-K 30/R300 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FF-L 2/20 - Ceramic pieces for wall courtains
FF-L 2/20 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • Tempio high-profile tiles for ventilated facade systems
Tempio high-profile tiles for ventilated facade systems
The Tempio terracotta tile rain screen or ventilated facade system offers a wide range of aesthetic qualities for building facades. The numerous advantages include improved thermal and acoustic properties, extended warranty periods, low embodied energy ratings, ease of installation, non-combustible fire rating, and sustainable production processes.
Caption
All Tempio high-profile tiles were originally custom-made for specific projects. Now, they are available as standard tiles because Tempio has kept the custom dies used for their production. These tiles, along with the custom fixing systems, were created in collaboration with project architects, DCA Facade Systems, and Tempio's Technical Team. All Tempio Tiles can be customized to pr... More
Product • By TEMPIO • FS-D 24 - Ceramic pieces for wall courtains
FS-D 24 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FS-LP 2/30 - Ceramic pieces for wall courtains
FS-LP 2/30 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FS-L Tempio Ventilated Façade Systems
FS-L Tempio Ventilated Façade Systems
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FS-30 - Ceramic pieces for wall courtains
FS-30 - Ventilated Facade Elements
FS system, vertical joint on facades. Its placing, with a wider perpend, fairly marks the horizontality of the pieces. This system has a special aluminium clamp that holds the piece and links it to the structure. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. Always following the same installation pattern, if, for example, we start right to left, we would fix the... More
Product • By TEMPIO • FK-L 59/16 - Ceramic pieces for wall courtains
FK-L 59/16 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More
Product • By TEMPIO • FK-O 8/20 - Ceramic pieces for wall courtains
FK-O 8/20 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More
Product • By TEMPIO • FK-L 4/16 - Ceramic pieces for wall courtains
FK-L 4/16 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More
Product • By TEMPIO • FK-2B 5/16 - Ceramic pieces for wall courtains
FK-2B 5/16 - Ventilated Facade Elements
FK system, horizontal joint panel facade. Vertical open and horizontal overlapping joints system. When installing it, we will constantly check weights and levels. We fix the brackets to the structure with a mechanical anchor, and to the wall using a chemical anchor. The anchors will be the most suitable according to the quality of the wall. We fix the vertical profile to the brackets with steel rivets, so it allows the dilation of the aluminium. To do this, we rivet a fixed point above and the following with mobile points. This pattern is used to place the entire horizontal profile. If, for example, we start right to left, we would fix the first on the right and the following would be mobile. We will always follow this guideline throughout... More