An angled brick extension brings daylight and spatial continuity to a Victorian house

Etta House is a residential renovation and extension by Stylus Architects in Balham, London. The project transforms a previously fragmented and poorly lit Victorian property into a more open living environment through a ground-floor side and rear extension.

Rather than replacing the existing building, the renovation reorganises its ground floor to improve circulation, increase usable space, and establish a stronger relationship with the garden. The design retains the character of the original residence while introducing a contemporary architectural language.

photo_credit Chris Snook
Chris Snook

The extension responds to the wedge-shaped geometry of the plot, using its irregular boundaries to determine the arrangement of walls, openings, and internal spaces.

photo_credit Chris Snook
Chris Snook
Applied Products block will be inserted here

Site-responsive geometry and brick construction

The rear elevation is defined by two angled brick walls that converge approximately one-third of the way across the façade. Their composition draws on the golden ratio, with the walls appearing to intersect while subtly passing one another. This geometry extends throughout the addition, where no two walls meet at a conventional right angle.

photo_credit Chris Snook
Chris Snook

The complex configuration required bespoke bricks to achieve consistent joints and precise corners. Although the resulting architecture appears restrained, its construction involved detailed coordination to accommodate the varying angles.

Chalk-toned brickwork continues from the exterior into the interior, creating material continuity between the two environments. Using the same material for external and internal surfaces establishes a cohesive architectural expression while reducing the need for additional decorative finishes in these areas.

photo_credit Chris Snook
Chris Snook
photo_credit Chris Snook
Chris Snook

 

Daylight and spatial connectivity

Increasing daylight was a central objective of the renovation. A large glazed roof and frameless rooflights introduce natural light into previously dark areas of the ground floor, reducing reliance on artificial lighting during the day.

Long sightlines extend through the house towards the garden, while the angled walls create gradual transitions between different living spaces. A full-height glazed pivot door provides direct access to the garden, strengthening the connection between indoor and outdoor areas.

photo_credit Chris Snook
Chris Snook
photo_credit Chris Snook
Chris Snook

 

A restrained material palette

The interior combines exposed brickwork with timber flooring, which extends across the ground floor to reinforce spatial continuity. In the kitchen, ribbed timber joinery introduces texture, complemented by deep green finishes.

The restrained selection of materials and finishes allows the building's geometry and changing daylight conditions to define the interior.

photo_credit Chris Snook
Chris Snook
photo_credit Chris Snook
Chris Snook

Project credits

Architectes

Sustainability

Efficient
Embodied carbon
Efficient
Operational Emissions / Energy
Efficient
Service and maintenance emissions
3
Key Low-Carbon Products

Project data

Année du projet
2025
Primary Building Material
Brick
Building Area
167 m2
Partagez ou ajoutez Etta House à vos collections