Archello Awards 2025: Open for Entries! Submit your best projects now.
Archello Awards 2025: Open for Entries!
Submit your best projects now.

Der Campus Leverkusen, Technische Hochschule Köln

Applied products
View all applied products

Die feuerverzinkte Pfosten-Riegelfassade aus dem Stahlprofilsystem Jansen VISS unterstreicht den industriellen Charakter des Hochschulgebäudes – und ermöglicht zugleich optimalen Tageslichteinfall durch maximal grosse Verglasungen.

photo_credit © Andrew Alberts, Berlin
© Andrew Alberts, Berlin

Um in den Büro- und Erschliessungsräumen die Anforderungen an den sommerlichen Wärmeschutz ohne den Einsatz mechanischer Raumlufttechnik zu erfüllen, wurden bereits während der Planung Simulationen durchgeführt; ausgehend von einer leistungsfähigen Sonnenschutzverglasung und einer erhöhten Nachtauskühlung. Im Ergebnis konnte die Aussenfassade als Fensterband mit festen Verglasungen und motorisch betriebenen Senk-Klappflügen zur freien Lüftung realisiert werden. „Hierzu war ein leistungsfähiges Fassadensystem notwendig, welches wir in Jansen VISS gefunden haben“, sagt Winkler.

photo_credit © Andrew Alberts, Berlin
© Andrew Alberts, Berlin

„Die bandverzinkten Stahlprofile garantieren eine lange Dauerhaftigkeit und betonen zudem den bewusst herbeigeführten industriellen Charakter des Gebäudes.“

photo_credit © Andrew Alberts, Berlin
© Andrew Alberts, Berlin

Neubau Campus Leverkusen of the Cologne University of Applied Sciences

The new building for the Cologne University of Applied Sciences is the first building block of a new era on the historic campus site of the "neue bahnstadt opladen", the former railway repair works in Leverkusen, Germany. As a classroom and laboratory building for the Faculty of Applied Natural Sciences with a main floor space of 7,300 square meters the new building combines different uses and rooms under one roof: laboratories, space for teaching and studying such as lecture halls, seminar rooms and learning landscapes, offices for lecturers and administration, but also library, workshops, canteen and kitchen.

photo_credit Andrew Alberts
Andrew Alberts
photo_credit Andrew Alberts
Andrew Alberts

The building’s location and shape offer potential for redefining the campus in terms of urban development and for a sustainable building structure:

- With the building, the outdoor spaces between the university and the future buildings will already be completely contained and creatively defined in the first construction phase.

- The predominantely two-storey building allows for a clear zoning into a learning and a laboratory world with a simple usage-neutral structure.

- Atria divide both floors into deep and narrow floor plans and organize them into functional units. On the ground floor, they provide direct access to the outside for all rooms, corridors as escape routes can thus be omitted.

photo_credit Andrew Alberts
Andrew Alberts
photo_credit Andrew Alberts
Andrew Alberts

The separation of escape and access allows the ground floor to be organized in the sense of an inner landscape as a series of permeable, transparent spaces. Circulation, recreation and learning zones can overlap and merge into one another. The dense alternation and the net-like structure of interior and exterior spaces lead to a complex spatial structure entirely in the sense of the intended learning world. The laboratories and workrooms on the upper floor are situated introvertedly within the industrial-looking shell at small atria and form the moving roofscape above. The technical infrastructures are assigned to the different room groups with short distances – an arrangement that ensures economic efficiency in the highly installed laboratory building. The university building thus implements ideas for sustainable spatial organization that also remains usable for future, yet unknown, usage scenarios.

photo_credit Andrew Alberts
Andrew Alberts
photo_credit Andrew Alberts
Andrew Alberts

The typologically proven comb structure was given a contemporary interpretation. Within a simple form a sustainable as well as economical building concept could be realized. The summer heat input is significantly reduced on the courtyard-side facades of the atrium-like, green inner spaces, as well as on the largely closed exteriors of the building. A suitable facade system was developed for night-time cooling of the offices and circulation areas. Concrete core activation and high internal storage capacities thanks to the open installations are further measures to meet today's demanding requirements and standards for energy efficiency, sustainability and an environmentally friendly construction.

photo_credit Andrew Alberts
Andrew Alberts
photo_credit Andrew Alberts
Andrew Alberts

Team:
Architect: augustinundfrank/winkler Architekten
Partner: Georg Augustin, Ute Frank, Steffen Winkler
Project team: Marta Torres-Ruiz, Maximilian Göbel
Construction management: Schilling Planung GmbH
Landscape Architect: Landschaft planen + bauen
Structural engineering: Pichler Ingenieure
Technical building equipment: Winter Ingenieure
Client: Bau- und Liegenschaftsbetrieb NRW, NL Köln
Photography: Andrew Alberts

photo_credit Andrew Alberts
Andrew Alberts
photo_credit Andrew Alberts
Andrew Alberts

Material Used:
1. Stahlsysteme Jansen: mullion/transom construction
2. Schüco: structural glazing facade
3. Laukien: steel trapezoidal sheet metal facade
4. Sill: Lighting of lecture halls / outdoor space
5. Zumtobel: lighting in access zone
6. Bene Systemtrennwände: Gantglas system partition walls
7. Silent Gliss: curtain, roller blind system
8. Création Baumann: curtain fabric
9. FSB: door fittings
10. Castelli 1877: Lecture hall seating

Caption
Caption
Caption
Brand description
Products applied in
Not Available yet
References Jansen
Teilen oder Hinzufügen von Campus, DE-Leverkusen zu Ihren Sammlungen