-Uses a led from PARAGONLED company. Is a D.O.B. (Driver On Board ), with two powers: 7 W with a light output of 560 lumens, for the beside wall lights and suspensions and, another one with 11 W with a light output of 845 lumens, for wall- ceiling light and track light. - Is dimmable by classical Triac or leading edge system. - This led meets the requirements of LM70 norm (which confirms that led keeps, as minimum, a 70 % of its light output at 50.000 working hours ) and, is situated in level 3 of MCADAMS steps (what implies that chromatic differences can only be seen by really skilled eyes). - Heat dissipation sink is injected in aluminium and, has a double body design to provide accommodation in the sphere. - Exterior sphere, double body as well, is produced by injection mold in ABS. White and black finishing are injected directly, while matt golden, nickel or cupper plating are injected in a special ABS that is prepared for post-treatment. - Arm that makes articulated axis function is also produced in injected ABS. - Optic that, apart from the aesthetic function of closing a perfect sphere has the function of protecting led of external contacts, is produced in Polycarbonate injected. For fixing it, has a bayonet system that allow to dismantle it in case could be necessary for cleaning it. - This series has two different beside wall lights versions: one with an injected base that incorporates its own switch and, another built-in version, in which minimum width has to be of 8 mm and a maximum of 80 mm. In this second version, switch has to be external. - Ceiling light is based on triphasic track adaptor. Mono-phase adaptor can be produced as well under request. - Suspension has triphasic adaptor as well. Mono-phase track can be produced as well under request.