The studio office is tucked into an existing undulation in the small village Trodena nel parco making it barely visible from any reference points in the village. Its appearance adapts entirely to the location, almost puritanical and yet defining its place. The conversion of the existing cut in the sloping terrain did not cause any noticeable slope deformation, so the outdoor space could be transparently restored to its original character as an inclined slope with a meadow area.
The building is naturally positioned in the slope in an unobtrusive manner and is legibly reserved in terms of materials and construction. It is recognisable by an ascetic, sloping curve that is made of exposed concrete that protrudes frugally from the terrain and thus defines a clearly legible outdoor space with access. This forms an evident entrance and at the same time creates a vertical connection between the slope and the studio office via a spiral staircase made of corten steel. On the ground floor, a small anteroom creates a sheltered outdoor space. In a smooth concrete cube, an unadorned entrance portal and an ornamental gate made of corten steel create connections to the interior and exterior space. Towards the front, black oiled corten steel uprights, including an attached trough with a layer of gravel of local porphyry and frameless glazing behind them, are the only visible façade surface. The resulting setback of the building invariably bundles the structure with its natural surroundings and ensures natural shade for the interior spaces as well as sufficient protection towards the outside.
On the inside you can find compactly positioned open-plan work areas including a meeting room and separate main office, a daytime toilet as well as service and technical rooms. A continuous frameless glazing, which is placed on a concrete base, on the inside shows the proportionate shift between the building and the external surfaces and holistically illuminates all the work areas.
Along the open main corridor, individual opening sashes in the frameless glazing continually create connections between the interior and exterior spaces. Partition walls made of OSB panels complement the equally formed, rough concrete walls facing the ground. Built-in furnishing elements organize the individual areas in the studio and create adequate working spaces.
The choice of materials is based solely on the attributes of the building site. An unmistakable performance is achieved through the exclusive use of the materials in their raw state. Black oiled corten steel defines exterior finishes and durability. All of the external walls are made of exposed concrete, with smooth formwork for the outside space and rough formwork on the inside. The interior walls and the furniture were made from untreated OSB panels. Only the table tops were chosen to be smooth for their intended use. Smoothed cement screed floors complement the uniform concept. Like this a harmoniously sparse material structure is created, striking in its entirety. By translating the disposition of the building site to the material arrangement, supported by unconventionally solved details, the spatial division and the integration of the building volume, an unmistakable added value was achieved for the surrounding area and its users.