Container house
Staffan Andersson

Re-use and adaptation, inside and out

This family residence was built of eight assembled, 20′ and 40′ re-used, high cube shipping containers. The house is built on a steep lot next to a lake, outside of Stockholm. There was a ban on dynamite for the site and there was no room for a slab, just a steep canyon where a lot of rainwater flows toward the lake . That is why the house stand on pillars.  The structural walls of the containers allowed the upper level to be larger than the entrance level footprint. This way the building adjusts to the V-shaped natural canyon of the site. The clients, a truckdriver and a therapist with three kids, have built the house mostly by themselves with big help from their father and father in law who is a skilled welder and used to run a mechanic workshop. The interior is a composition of rare finds and re-used building components. 

photo_credit Staffan Andersson
Staffan Andersson

A shipping container is actually not a great starting point for a home because of its limited width, 2,4 m. Also, as soon as you cut parts of the corrugated walls between two containers to make a wider room the container looses its structural strength. Therefor we had to put a lot of effort into deciding which walls to cut and which to save so that we could use the containers with as little additional structure as possible.

The client husband worked for a demolition company and is an avid mechanic with a love for old customized american cars. Re-use and alteration became the way to build the house, much in line with the custom car culture. Salvaged from demolition sites around Stockholm, componenets like timber planks, metal boards, staircases in wood and steel and parts of old kitchens were re-used and installed after slight modifications. 

photo_credit Staffan Andersson
Staffan Andersson

Each architectural detail was drawn directly from the raw material that was found. Trust and dialogue rather than standard solutions characterized the building process that included many discussions on site between architect, client/builder and structural engineer. Quick hand drawings complimented the drawing set. 

The original proposal and plan was never changed though. In a house scheme, the plandrawing and the flow of the plan, the ability to always walk towards light and to have surprising views and diagonals, is regardless if you make a container house or a woodframe house, very important.

Caption

This is a modest home for a family with three kids so each square meter had to be planned carefully.

The entrance level has a den and a guest bedroom, laundry and the master bath with a view.

The upper level has living-dining and terrace towards the view and bedrooms in the back towards the forest.

photo_credit Staffan Andersson
Staffan Andersson

The top container has two functions, as a look-out mezzanine where the kids can find solitude but still be around, and also as a light shaft that brings the midday sun into the northfacing livingroom. Even though the harsh site faces north the living-dining room is flooded with direct sun and the roof terrace has a great evening sun location.

photo_credit Staffan Andersson
Staffan Andersson

The upper level is connected to the pinetree forest behind the house by a free spanning eight-meter steel truss sky-bridge. The rectilinear world of stacked containers meets the natural form of the hillside. The house stands on steel columns on concrete plinths. This eliminated the problem with large amounts of rain water that flows down the steep hillside. This is very explicit during heavy rains seen from the lower bathroom. It has one big window facing the zen-like view of the canyon rock at the backside of the house. A small openable window to the left makes it possible to hear the birds outside when taking a bath.

photo_credit Staffan Andersson
Staffan Andersson

The subdividing mullions of each window, together with exterior add-ons that were needed to make the containers up to code (such as railings, chimneys and water dispensers) were all designed to give the house its own logic and proportions. A composition that dissolves and goes beyond the absolute symmetry of shipping containers.

photo_credit Thomas Jacobsson (client)
Thomas Jacobsson (client)

There is a point in the design process where the stacked containers, with everything that is added and modified, cease to be containers and instead becomes an assembled building fixed in a landscape. This point interests me and guided me through many design challanges with the house.

/Måns Tham

photo_credit Måns Tham Arkitektkontor AB
Måns Tham Arkitektkontor AB
Share or Add Container house to your Collections