Made in Austria,
highest European quality and added value
highest European quality and added value
special thread geometry
optimal tensile effect in the end grain
optimal tensile effect in the end grain
fastens wood to wood, even panel materials
are screwed without pre-drilling and countersinking
are screwed without pre-drilling and countersinking
fixes pressure-resistant insulation materials for over-rafter insulation
for insulation materials with a compressive stress of more than 50 kPa
for insulation materials with a compressive stress of more than 50 kPa
Screw connection at 0° to 90° to the fiber permitted
fixed at all screw-in angles
fixed at all screw-in angles
The special multi-stage head reduces the splitting effect in wood,
saves 50% of storage, combines countersunk head and flat head; transmits high forces, is still countersunk and allows screwing close to the edge
saves 50% of storage, combines countersunk head and flat head; transmits high forces, is still countersunk and allows screwing close to the edge
Special milling ribs on the shaft and special coating
Pre-drilling effect of the attachment, particularly easy screwing in, battery-saving
Pre-drilling effect of the attachment, particularly easy screwing in, battery-saving
SIHGA® tip
for quick screw insertion, easy to process and time-saving
for quick screw insertion, easy to process and time-saving
Including SIHGAFIX®, Systemstift® and assembly instructions
, time-saving, practical, precise; all accessories are included, SIHGAFIX® enables screw connections even in deep grooves
, time-saving, practical, precise; all accessories are included, SIHGAFIX® enables screw connections even in deep grooves
SIHGA® Decorative disc MSZ for diameter 8 mm
the decorative disc MSZ increases the tensile force of the head to 9.1 kN, optically very attractive solution
the decorative disc MSZ increases the tensile force of the head to 9.1 kN, optically very attractive solution
Screw connection at 0° to 90° to the fiber permitted
fixed at all screw-in angles
fixed at all screw-in angles
Design values
SIHGA® carries out the calculation for you
SIHGA® carries out the calculation for you
Highest earthquake resistance - GoFix® MS II
- SIHGA® is ahead of its time
Tests already carried out for the current revision of Eurocode 5 - Latest tests confirm excellent properties
Ductility provides safety - Best ductility class S3 for earthquake
safety according to prEN 14592 - Simulated earthquake load through cyclic bending of the screws,
reliable residual load-bearing capacity of at least 90%
GoFix® MS II application using impact wrench (tested by the University of Innsbruck)
positive report for processing with impact wrenches
positive report for processing with impact wrenches
GoFix® MS II application in end grain
GoFix® MS II application in hardwood
- Approved for use in hardwood
Safety according to ETA-13/0842 - Extensive application by means of pre-drilling possible
in solid wood, glued laminated timber and laminated veneer lumber - Head pull-through values and thread pull-out values may be increased by the factor k dens
; observe maximum tensile strength according to ETA high load-bearing capacity for high-performance connections
