The quality immediately shows, to the sight and to the touch, thanks to a solid structure (able to carry 1000 kg per piece), counter ring nuts for mechanical blocking of the height, and an adjusting ring nut that allows two simultaneous movements between base and screw, doubling the adjustment speed for a truly excellent laying performance. From the fourth item onward (115-220 mm), the base makes it possible to house the small headpiece and position the support upside down, thus making it possible to obtain a larger resting surface, which is crucial when laying tiles with reduced thickness.
Moreover, for each product reference, the only element that changes is the number of extensions to be used, thus ensuring the best performance from a logistical standpoint. Each extension increases by 10 cm the height of the support, facilitating the nprocurement phase and speeding up in a simple and intuitive manner the tile layer’s njob at the work site. The 105-mm range of the adjusting ring nut completes the range, allowing a total range from 115 to 1020 mm.
On the entire set of MegaMart supports, a handy and multifunction adjusting key is used to easily remove the small headpiece from its housing, release the limit stop in case of need and make the adjustment phase easier. nAll supports can be used in conjunction with the CP Easy Flat nseries of slope correctors, for slope corrections of up to 10%.
