Walky square bollard

by iGuzzini
  • Bollard installation
  • Complete with plastic cable gland and output cable 0.5 - 1 m long
  • Tempered frosted sodium-calcium safety glass
  • The bollard is anchored to the ground by means of a galvanized and painted steel mounting base
  • All external screws used are in A2 stainless steel

Specifications

General

Product Name
Walky square bollard
Designer
iGuzzini
Manufacturer
iGuzzini

Product Type

Outdoor Lighting
Bollard lights

Product Specs

Light source
LED

This extraordinary collection of miniaturised round, square and rectangular luminaires starts from a height of just 25mm. Recessed or surface-mounted, Walky luminaires are a winning combination of technology and design. We have miniaturised form, but not performance! Actually, we have exceeded existing performance levels for this product category by transforming our skill in vertical excellence into horizontal excellence thanks to a new optic. This innovation distributes lighting on a horizontal plane exactly from the point at the base of the vertical wall the product is installed on, and then evenly across the surface in question. The effect produced is sharp and clear with no shadow cones near the wall. So, maximum visual comfort and a Dali dimmer option for the recessed versions.

• Lighting system for walkways designed for use with LED light sources to ensure high visual comfort.
• Bollard installation.
• Comprising an optical compartment with IP66 protection rating and bollard to be ordered separately.
• Optical compartment and bollard in aluminium alloy with powder paint coating treatment to ensure high resistance to atmospheric agents and UV rays. Plastic closure casing in the rear part of the optical compartment.
• Complete with plastic cable gland and output cable 0.5 - 1 m long
• Tempered frosted sodium-calcium safety glass.
• Optical compartment mounted on bollard by means of a single torxtype stainless steel screw (safety type).
• The bollard itself houses two stainless steel rods secured to the base, ensuring the product has high resistance to impacts.
• The bollard is anchored to the ground by means of a galvanized and painted steel mounting base.
• The bollard can be secured to the ground/paving using anchoring pads (on paving) or a mounting base and counter-plate with clamps fi nished with Dakromet, ensuring further assurances against corrosion (to be ordered separately).
• Walky optical compartment with built-in 220 ÷ 240Vac On-Off or 24Vdc remote power supply.
• On-Off, Dali, IP67 power supplies are available for 24Vdc versions to be ordered separately.
• Bollards are available with IP66 220 ÷ 240Vac built-in power supply for 24Vdc Walky versions (ø100, 90x90 and 270x90mm).
• Protection against over-voltages (220 ÷ 240Vac versions): 2kV in Common Mode (CM), 1kV in Differential Mode (DM).
• Ambient operating temperature: Ta -30°C +50°C for 24Vdc versions, Ta -20°C +50°C for 220-240Vac (On-Off) versions.
• All external screws used are in A2 stainless steel.

More products by iGuzzini

Share or Add Walky square bollard to your Collections
USO
suggested

USO

by Flos
View Product
Bollard lights
view more

Bollard lights

View More
Archello

Want to see more like this?

Subscribe to Archello's newsletter