Jesolo Lido Pool Villa

The Jesolo Lido Pool Villa is a custom designed prefabricated wood structure, and it was built and furnished in only 6 months. Energy-saving high standards have been applied to the shell to guarantee maximum comfort and almost zero costs throughout the four seasons. The building features wood structures as a flexible and anti-seismic system which also avoids thermal bridges. The 31 cm of perimeter insulation, argon-gas insulated glass facades, 10 kw of photovoltaic panels installed on the roof and the interior / exterior led light fixtures co-operate in making a technologically contemporary building. Because of the small dimensions of the plot, the design goal has been directed in leaving as much open space as possible. The indoor living area has transparent sides which opens towards two different-sized patios.

The largest one, to the west, features a long swimming pool, which takes the entire length of the space, and two planted square inserts. An olive tree is the main three-dimensional element in the patio and it’s placed next to the staircase which leads to the underground level, where the storage and technical rooms are located. The smaller patio, to the east, also features two planted inserts with another olive tree to counter balance the other side.

The outdoor areas, as a client’s main request, needed to be low maintenance, so most of the surface was paved and the plants in the inserts where selected in order to live with the least care possible. The 4-meter roof overhang to the west allows to have enough shading during the hot summer months and allows to place a covered outdoor seating and dining areas. Interiors are custom designed with typical JMA solutions, like audio/video walls, custom designed solid-surface kitchen, motorized roller shades which disappear into the dropped ceiling for maximum continuity of indoor-outdoor areas, integrated indirect lighting and home automated electrical system. The radiant floor heating system is powered with an electric heat pump which takes the energy from the photovoltaic panels. The air-conditioning system is fully integrated in the dropped ceiling with linear diffusers and hidden intakes. As always for JMA, the pursuit of simplicity and linear solutions represented a large part of the design work.

"People understand the language of a space when it is finished."

Italian studio JM Architecture designed a 3-bedroom villa as part of a larger planned development in Jesolo, a town that stretches 15km with a width of 500 metres along the Adriatic coast, close to Venice in Northern Italy. Their clients, a young couple with newly born twins, were clear about two things in their brief: They wanted a very low-maintenance house, including the outdoor areas; and they wanted to eliminate the use of wood as far as possible – bar the prefabricated wood construction of the house.

An interview with Jacopo Mascheroni, founder and lead architect at JM Architecture, reveals more about the design and its unique features.

There seems to be a lot of emphasis on outdoor space in the design. Why is this?

Jacopo Mascheroni: The objective was to create one fluid space, where indoors and outdoors is very much aligned – in terms of geometries, materials and tones. Working with a small site of 550 square meters meant that the challenge to create openness was doubled. What really helped at this stage was our knowledge of materials and how we could use them to build and cover the entire site without creating the impression of enclosure. We already had a vision to use Dutch-based company Mosa's ceramic tiles, for example, so those informed decisions made the task at hand a lot easier. Having such beautiful surrounding views definitely encouraged the idea to emphasise the exterior too.

The house has a L-shaped plan, however, it can be read as a rectangular block as one side utilizes a large 4-metre canopy with glazing beyond, giving the impression of transience to help create this openness we wanted to achieve. The block by the pool offers a necessary contrast though, both aesthetically and functionally, as it houses the private spaces such as the bedrooms and bathrooms.

The house appears very white and transparent. How have you managed to create a non-clinical atmosphere?

On one side the whiteness and transparency helped to create that feeling of openness but on the other side we understood that it could also feel sterile, especially without the use of wood finishes in the design. The solution was to find another material that played with the whiteness – we didn’t want to reject the whiteness - we wanted to use other materials to enhance its qualities and vice versa. And that’s why we introduced Mosa ceramics into the design, our prior experience with the material definitely pushed our thinking towards using an entire 'ceramic skin,' as Mosa refers to it.

So you chose ceramic tiles to create warmth, as an alternative to wood?

Wood was eliminated from the start as the clients felt it created maintenance and humidity issues. This limitation became a great advantage in the end as we chose to use Mosa's ceramic tile collection, named Quartz.

The material not only solved our functional needs, but it also offered a very original aesthetic - it was able to reflect a warm light onto the whiteness. Using Mosa presented a 360-degree solution: we could use the tiles indoors and outdoors; on walls and floors; in the pool and around the pool. There were a variety of sizes, tones and two surfaces available: smooth and rough. Both natural and artificial lighting worked with the tiles to produce a homely atmosphere – away from monotonous white and sameness. This is where we really had to think about the relationship between the materials we wanted to use and lighting.

And how did you do this?

We had to look at how the house would feel during all the seasons, in natural and artificial lighting. In Northern Italy, it gets dark after 5pm so for six months of the year you use artificial lighting. This meant that it was vital to observe how the house would look and function through artificial lighting, but we made natural lighting a priority, as this is what truly creates the atmosphere with the materials.

It’s quite a large commitment to use the same material throughout a house – from inside to outside, covering nearly the entire plot. What influenced this decision?

The material itself and the people we were working with. We had used Mosa tiles previously and so we were familiar with the quality of the tile. But what really helped was the one-to-one mock-up we were able to create. We had enough samples to create different test pattern arrangements and we left the tiles to observe their reaction to direct and indirect light over a month – the clients also saw this, which really boosted our confidence in what it would actually look like, as opposed to a showroom scenario which can feel artificial. You can always envision how something will look and you can plan for it, but a good result does not come by chance.

Is there a pattern to the floor design or is the arrangement quite random?

The most important thing to realise when trying to create a beautiful floor is that 50% is given by the material you chose to use and 50% to the pattern that you can give to it. We created a story with our pattern that went as far as to include furniture alignments.

The beauty in the tiles is that as well as their own tone and texture benefits; there is a wide range of formats, from 5 x 60cm to 90 x 90cm in square and rectangular forms. played with the combination of narrow strips with larger tiles, combining different arrangements. This created original detailing for the swimming pool and bathroom areas especially, as these areas required both floor and wall tiles so the size differentiations and tones really added depth. For example, a deeper shade was placed around the pool to give it a frame and define it as its own element. Adding to this, around the poolside, we used a rough finished tile that increased tactility to accommodate for the water. This flexibility is what matters when it comes to using ceramics.

How important was it to JM Architecture to come up with a design that would be sustainable?

All the energy circulates. The entire heating system is electrical - no gas - and this system is powered by the photovoltaic panels laid on the roof. By careful calculations, there are enough panels at the right size to accommodate for seasonal changes in energy use. We managed to understand how many kW of power is needed to run the whole house efficiently and combined with all the passive cooling strategies, the house presents an economical and efficient solution. It was very important to us and relevant to the broader development plan.

Using Mosa tiles was another integral and conscious decision, not only owing to their aesthetics and functionality, but also their environmental significance - the tiles are Cradle-to-Cradle Silver certified, meaning Mosa considers the life cycle of its tiles and this was a great asset to our overall sustainable agenda as the material was used throughout. As well as this, we used LED lighting in the house to keep costs down. There is also radiant floor heating for the colder months.

The first design has been plotted. What happens next?

People understand the language of a space when it is finished. Now we have a prototype to show other buyers what they will actually get, customised to their specifications. Although they will alter in height and size, we will use the same materials, colours, lighting and landscape to create continuity and depth across the whole development - it strengthens the entire concept.

www.mosa.nl or [email protected] for more information on the Quartz collection used in this project and more...