Coque MD is an open joints wall metallic cassette intended for the realisation of flat facades. It is implemented through notches located in its vertical folds on supporting rails fitted with adjustable brackets.
Can be used for cladding facades on masonry, concrete walls or timber frame houses, including blind walls or with openings
Suitable for new construction as well as for rehabilitation
Installation in seismic zone
Hollow joints from 3 to 30 mm
In prepainted steel and stainless steel 1.5 to 2 mm thick & aluminum 2 and 3 mm thick
Height from 100 to 1,350 mm for width from 100 to 3,000 mm
Height from 1,350 to 3,000 mm for width from 100 to 1,370 mm
Height from 3,000 to 3,800 mm for width from 100 to 800 mm in steel and from 100 to 600 mm in aluminum
Perforation and bending possible (contact us for validation)
Very discreet bracket axis
Invisible fixings
Removable, a Coque MD panel located in the middle of the facade can be changed without removing a complete row of cassettes (or complete gable wall) with a vertical hollow joint of 10/15 mm and the locking of the cassette by setting opposition of the stirrups (Except by horizontal grid on 3 supports)
