The special advantage of the reveal panel is the design freedom of face heights that can range from 200-333 mm with a variable joint widths from 0 - 30 mm. The option of using different installation directions (horizontal and vertical) or a combination thereof, mean that reveal panels offer architects tremendous freedom to implementing their designs allowing most building shapes to utilize this system. RHEINZINK reveal panels are based on the tongue-and-groove system and attached to a metal substructure at the groove using rivets or self-tapping screws. The distance required to the substructure depends on factors such as wind loads, the type of framework, structural system and the load-bearing capacity of the cladding and demonstrated with calculations. System Description · Can be installed horizontally or vertically · Choice of panel and reveal widths · Hidden fasteners RHEINZINK panels are particularly suitable for façades subject to high aesthetic requirements such as commercial / office buildings or public buildings designed with a modern, "technical" look. RHEINZINK panels are increasingly being used to cover small areas such as dormers, fascias and gables. Reveal panels with an overall depth of 25 mm offer a wealth of design possibilities as they can be installed either diagonally or vertically. The variable width of the shadow gap contributes to the individuality of the structure.