House on a Wharf
Trent Bell

House on a Wharf

Applied products
View all applied products

This new residence on a small coastal harbor occupies roughly the same footprint as the original building that had stood since the early 20th century.  The old structure had many uses over the years. In addition to servicing the steamers arriving along the coast, it at various times functioned as an apartment house, a laundromat, and a summer home.  To shore up the site the stone wharf was raised and the new house placed on piers to comply with floodplain regulations, elevating the structure above the high tides that periodically washed into the living room of the original house.  A deck wraps the first floor perimeter grounding the new building and creating outdoor spaces that take advantage of the inimitable site, providing connection to the tiny guest house/studio that sits adjacent, suspended on piles above the water below. 

photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell

Design for Energy: Photovoltaic panels were used to reduce electrical consumption. Heating and cooling are provided by heat pumps.  The building is oriented for passive solar heating with an enhanced thermal envelope including continuous insulation around the entire perimter and blown-in insulation in teh wall and roof cavities.

photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell
photo_credit Trent Bell
Trent Bell

Design for Ecology: The building was developed on an existing site within the existing footprints of two buildings.  A commercial space was repurposed for residential use which involved shoreline restoration and stabilization.  Native plantings that are saltwater tolerant were used around the building eliminating the need for irrigation.

Design for Resources: Local, low-maintenance materials were used throughout, including rough hemlock deck framing, white cedar shingles, and wood wall and ceiling finishes.  A materials list was developed to eliminate harmful off-gassing when selecting finishes and sealants.  Local stone was utilized for the wharf material and landscaping.

Caption
Caption
Caption

Project credits

Architects
Interior Design
Landscape Architects

Sustainability

Low Carbon
Operational Emissions / Energy
Low Carbon
Service and maintenance emissions

Product spec sheet

Exterior sliding doors
Flooring finish
Traffic HD by Bona
Weather resistive barriers
Windows and doors
Wood cladding

Project data

Project Year
2020
Primary Building Material
Steel
Wood
Building Area
1818 sq ft
Share or Add House on a Wharf to your Collections