Creation of BIM Models with LOD 300 of Eye Hospital

Challenges: • The inputs received from the client in the form of pdf files were too blur & unclear. So biggest challenge was to first understand the inputs by proper client coordination. • The models prepared were too heavy as level of detailing was high, so it becomes little difficult to work with such heavy files. There were too much clashes between the models. Execution: • The inputs available with us were in the form of pdf files, which we were to convert into intelligent BIM models using Revit. • Next step was to create BIM models with different disciplines like Architectural, Structural & MEP which was successfully accomplished as per client’s requirement in the form of 3D Revit Models. • Finally after that we started to look into the coordination between the models, so called Clash Detection & were successful in scrutinizing all the clashes. • The clash detection process helped the client to nullify the clashes at a very initial stage which may have created huge loss at the time of actual construction. • Material take off & project completion schedules provided by us reduced client’s overall project time, cost as well as made the complete process error free and smoother. Inputs Received: PDF files Outputs Delivered : BIM models with following disciplines: Architecture, Structure, MEP Software Used: Revit Want to discuss your project requirements with our BIM experts, please email us at [email protected].