BeveLED Basic Recessed Downlight - Our narrow footprint housing provides an economical architectural solution while delivering high performance with LEDs.
SPECIFICATIONS
TRIM: 4-1/2” square aperture with a 1” regressed bevel, retained by four mounting clips. Die cast aluminum bevel is available in white, statuary bronze, black, and metalized grey finishes. Also available in black anodized or clear matte anodized bevel. Custom color available (provide RAL#).
TRIM LENS: Trim is shipped with integral solite lens standard; frosted lens available as an option.
REFLECTOR: Interchangeable precision injection molded specular polycarbonate reflector optimized for 30°, 50° or 80° beam distribution.
FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen packages: 14W (1000 delivered lumens) and 20W (1300 delivered lumens). Engine is field replaceable through the aperture without tools.
COLOR: BeveLED is available in 4 color temperatures (2700K, 3000K, 3500K, 4000K). All color options are tightly binned for fixture-to-fixture color consistency within a 2-Step MacAdam Ellipse. 80+ color rendering index provided standard.
RATED LIFE: Based on IESNA LM80-2008 50,000 hours at 70% lumen maintenance (L70).
THERMAL MANAGEMENT: Proprietary high performance aluminum die cast heatsink for maximum LED life. Ambient temperatures at fixture location should not exceed 40°C during normal operation.
FIELD REPLACEABLE DRIVER: 0-10V, 100%-10% solid state electronic constant current driver with a high power factor provided standard and sources 2mA. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection.
DIMMING OPTIONS: Multiple dimming drivers available. See compatibility chart attached. Some on-time delay may be experienced depending on control system used. Note: DIML6A and DIML6E logarithmic control are intended for use with Lutron control systems; DIML6B and DIML6F linear control are intended for use with non-Lutron controls. DIML6 drivers source 2mA.
EMERGENCY: Emergency lighting battery pack is provided with remote test switch and require above ceiling access for service. EM option is not available with IC or CP housings.
MOUNTING: Butterfly brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14" to 24" centers.
HOUSING: Fabricated of 20 ga. galvanized steel with thru wire J-box, 4 in 4 out at min. 90°C, #12 AWG thru branch circuit wiring. IC rated housing is rated for direct contact with insulation. All-Ways Square® (covered by US Pat. No: US 7,832,889) housing allows alignment of square aperture (up to 20° rotation) after housing installation and prior to finish ceiling installation.
MAXIMUM CEILING THICKNESS: As per drawings above. ML option is for 1” max thickness wood with IC housing and for 2-1/4” max thickness wood with NCSM2 housing. Millwork option is not available with NCSM1 housing.
CEILING CUT OUT: 5-1/16" x 5-1/16" Millwork: 4-13/16” x 4-13/16”
LISTINGS: Dry/Damp. Wet location option available with B1 trim only. Millwork Dry/Damp only. NRTL/ CSA-US tested to UL standards. IBEW union made. Energy Star Qualified under Luminaires Specification V2.0. Please see Energy Star website for exact model #s included in the listing. Please note that only B1-S-10 trims, 30º and 50º optics, and DIML2 dimming drivers are Energy Star Qualified.
WARRANTY: 5 years
