Specifier · Save time: Make one inquiry to multiple manufacturers.
Care lab

Care lab

dmvA Architecten
Bruges, Belgium | View Map
Project Year
Bart Gosselin

Care lab

dmvA Architecten as Architects

Care lab is a part of the university building Vives North in Bruges. The building is completed in 2009 and designed by De Vloed architects. It consists of three annexes: a relatively closed concrete plinth, a three-story building and a floating roof. Characteristic to this school building is the frequent use of exposed concrete for load bearing walls and floors.

dmvA was commissioned to transform the existing Care lab, located in the wing next to the service entrance. dmvA based its architectural concept on the contemporary vision on education. In the past, the different educational fields were kept separated and each had its own closed classroom, whereas now the aim is to stimulate cross-pollination between the different fields.

The building originally existed of three long small spans which limited the flexibility and made the circulation difficult. dmvA decided to cut through the three spaces by placing an educational care home in the middle of Care lab. Through this transformation, Care lab gets converted to a smooth network of spaces that encourages cross-pollination between the different departments. Since Care lab is used by different departments, it was important to fill in the spaces in a clever and multifunctional way. In that way Care lab has become a flexible space with multidisciplinary classrooms. 

The care home, the heart of Care lab, simulates a cozy residential home, but is still abstract. Instead of using closed walls, the care home is surrounded by an open closet system. That way Care lab becomes open and accessible. The wooden structure around the care home doesn’t only serve as a half open wall but can also serve as a storage or exposition space.

The building where Care lab is located, is built in concrete. The cool and clean concrete architecture was preserved but was complemented by the use of pinewood. By adding this warm material, a homely atmosphere is created, welcoming you when you enter the building.

Material Used :

1. Pine wood plywood

2. Melamine white

3. Exposed concrete

4. High pressure laminate

5. Coating on polished concrete

This story is available in multiple languages
Project Credits
Structural engineer
General contractor
Product Spec Sheet

Villa R&V II
next project

Villa R&V II

Private Houses
Cambrils, Spain - Build completed in 2019
View Project