Plexwood - Geometric Tile

by plexwood
  • Floor, edges and skirting
  • Natural wood
  • Sustainable
  • 100% recycable
  • Multifunctional Design

Specifications

General

Product Name
Plexwood - Geometric Tile
Manufacturer
plexwood
Manufactured
Netherlands

Product Type

Facade cladding
Wood cladding
Wall covering
Wall panels and cladding

Product Specs

Material
Wood, Oak, Birch, Poplar, Beech, Pine, Ocoumé, Meranti, Deal
Wood-Product, Plywood, Wood veneer

Documentation

Catalogues (1)

  • Floor, edges and skirting
  • Natural wood
  • Sustainable
  • 100% recycable
  • Multifunctional Design

About Plexwood

Plexwood is an innovative interior design veneer, composed of end grain wood and with the grain veneers, which give the product a clear linear structure. 

Plexwood can be used for floors, walls, ceilings, staircases, furniture, and company logos, amongst many other conceptual applications. 

End grain wood, one of the main components of Plexwood, is harder than regular cut wood, making Plexwood products suitable for high traffic environments like public spaces, office, retail, education and health care environments. 

In our production we do not use formaldehyde based glue or volatile organic compounds (VOCs). Plexwood can meet almost any sustainability standard or certification.

 


Available in 12 products: Strip, Parquet strip, Plank, Tile, Panel one-sided, Panel two-sided, Panel flexible, Geometric, Acoustic, Solid, Profile and Special.

Available in 9 kinds of wood: Birch, Beech, Oak, Pine, Pine/Ocoumé, Meranti, Ocoumé, Poplar and Deal.

 

About Geometric

Geometric is a 2-layer wood product, consisting of a substrate with a Plexwood veneer on one side.
Normally Plexwood is composed of 0- and 90-degree lines that can run both over the length and width of a panel or flooring product. What happens when these lines are angled in 15, 30, 45 or 0/90, +15/-15, +30/-30, +45/-45 degrees? New surfaces appear, creating inspiring and unlimited possibilities.

The graphic patterns that were developed for Plexwood - Geometric are based on classic mathematical principles that are both at the core of Oriental mosaic art and architectural grids, with its repeating patterns, tessallations and M.C. Escher-like optical illusions, Geometric can be applied endlessly, on every scale and in every direction.

Geometric is available in Diagonal, Square, Rectangle, Herringbone, Parallelogram and Trapezium.

Depending on the pattern, Geometric is as standard available as Plank, Tile and Panel one-sided, with two veneer thicknesses.

 

 

Characteristics wall, ceiling in metric dimensions:

Geometric is available in a variation suitable for walls and ceilings, in that case an mdf substrate is most common, in combination with a veneer of 2.5 mm Plexwood. 

 

Geometric - Plank
Geometric-Plank for wall, ceiling and furniture is, apart from the standard veneer 0° long grain (l) = 2400 mm or 90° cross grain (l) = 160 mm, available in the geometric patterns diagonal 15°, 30°, 45°, rectangle 0°/90°, herringbone +15°/-15°, +30°/-30° and +45°/-45°. 

The standard measurements are ± 2400/2100/2000 x 160 x 17.5 (15 mdf/plywood + 2.5 Plexwood) mm. The length of Plank depends on the chosen pattern or angle. Geometric - Plank for wall and ceiling has tongue and groove or a full groove and separate slip tongues, and is delivered filled and sanded 80-grit. Plank for wall and ceiling is standard without bevelled edge, but when it is combined with a floor, it can also be made with.

Standard dimensions (for walls and ceilings), l x w x t:
Plank: ± 2400/2100/2000 x 160 x 17.5 (15 mdf/plywood + 2.5 Plexwood) mm

 

 

Characteristics wall, ceiling in imperial dimensions:

Geometric is available in a variation suitable for walls and ceilings, in that case an mdf substrate is most common, in combination with a veneer of 0.10” Plexwood. 

 

Geometric - Plank
Geometric-Plank for wall, ceiling and furniture is, apart from the standard veneer 0° long grain (l) = 94.49” or 90° cross grain (l) = 6.30”, available in the geometric patterns diagonal 15°, 30°, 45°, rectangle 0°/90°, herringbone +15°/-15°, +30°/-30° and +45°/-45°. 
The standard measurements are ± 94.49”/82.68''/78.74'' x 6.30'' x 0.69'' (0.59'' mdf/plywood + 0.10'' Plexwood). The length of Plank depends on the chosen pattern or angle. Geometric - Plank for wall and ceiling has tongue and groove or a full groove and separate slip tongues, and is delivered filled and sanded 80-grit. Plank for wall and ceiling is standard without bevelled edge, but when it is combined with a floor, it can also be made with.

Standard dimensions (for walls and ceilings), l x w x t:
Plank: ± 94.49”/82.68''/78.74'' x 6.30” x 0.69” (0.59” mdf/plywood + 0.10” Plexwood) 

 

 

Characteristics flooring in metric dimensions:
Geometric is also available in a variation suitable for floors, in that case a plywood substrate is most common, in combination with a veneer of 4.5 mm Plexwood.

 

Geometric - Plank
Plank for flooring is, apart from the standard veneer 0° long grain (l) = 2400 mm or 90° cross grain (l) = 160 mm, available in the geometric patterns diagonal 15°, 30°, 45°, rectangle 0°/90°, herringbone +15°/-15°, +30°/-30° and +45°/-45°. 
The standard measurements are ± 2400/2100/2000 x 160 x 19.5 (15 plywood + 4.5 Plexwood) mm. The length of the plank depends on the chosen angle. Geometric - Plank for the floor has tongue and groove, and is delivered filled and sanded 80-grit. Plank for the floor is standard with bevelled edge, but when the floor will be fixated, it can also be made without. 

Standard dimensions (for floors), l x w x t:
Plank: ± 2400/2100/2000 x 160 x 19.5 (15 plywood + 4.5 Plexwood) mm

 

 

Characteristics flooring in imperial dimensions:
Geometric is also available in a variation suitable for floors, in that case a plywood substrate is most common, in combination with a veneer of 0.18” Plexwood.

 

Geometric - Plank
Plank for flooring is, apart from the standard veneer 0° long grain (l) = 94.49” or 90° cross grain (l) = 6.30”, available in the geometric patterns diagonal 15°, 30°, 45°, rectangle 0°/90°, herringbone +15°/-15°, +30°/-30° and +45°/-45°. 
The standard measurements are ± 94.49''/82.68''/78.74'' x 6.30'' x 0.77'' (0.59'' plywood + 0.18'' Plexwood). The length of the plank depends on the chosen angle. Geometric - Plank for the floor has tongue and groove, and is delivered filled and sanded 80-grit. Plank for the floor is standard with bevelled edge, but when the floor will be fixated, it can also be made without. 

Standard dimensions (for floors), l x w x t:
Plank: ± 94.49''/82.68''/78.74'' x 6.30'' x 0.77'' (0.59'' plywood + 0.18'' Plexwood

 

 

 

This story is available in multiple languages

More products by plexwood

Share or Add Plexwood - Geometric Tile to your Collections
Atria
suggested

Atria

View Product
Wood cladding
view more

Wood cladding

View More